Avocent SWITCHVIEW OSD -, Инструкция по установке и эксплуатации

Страница: 32 / 56

26
SwitchView OSD Installer/User Guide
Administrator Functions
The Administrator Functions Menu is accessed from the Command Menu.
Here, you can create an administrator password, set a system logout time and
create individual user logins with specific access and privileges.
This menu
is only used if you are running your system in secure mode.
If you config-ure an
administrator password from this menu, your system will then be in secure
mode. A lock symbol will appear to the right of the menu headings to indicate
secure operation. If you wish to keep your system in the default non-secure
mode, return to the Command Menu. For the differences between secure and
non-secure modes, see below.
Differences between Secure and Non-Secure Operating Modes
Administrator Password
Entering an administrator password places your system in secure mode.
Non-secure systems do not use passwords. To return your system to the
default of non-secure mode, simply delete the administrator password.
When the administrator password is enabled, user passwords must also be
entered or the switch will not be completely secure. The default for users is
no password. Simply hit the enter key at the prompt.
Logout Capability
You have the option of automatically logging out of the system after an
administrator defined period of inactivity. Timeout values can be set from 0
to 60 minutes. A value of 0 keeps the user logged in continuously. When the
timeout is reached, the current channel is deselected and the display goes
to screen saver mode. Users must login again to access system computers.
This option is only available in secure mode.
Multiple User Logins
You can create up to four user logins in addition to the system administra-
tor. Use these logins to configure and control server access for every type of
system user. The administrator has full access privileges; additional users
can have viewing or viewing with keyboard and mouse control capability
for each attached server. This option is only available in secure mode.
Hot-Key Channel Selection
While in secure mode, all hot-key channel selection methods are disabled.
All other hot-key commands remain operational to the administrator only.
In non-secure mode hot-key commands function normally.