Avocent SWITCHVIEW OSD -, Инструкция по установке и эксплуатации

Страница: 16 / 56

10
SwitchView OSD Installer/User Guide
Advanced Install
Attaching Multiple SwitchView OSD Units to your System
1. Follow steps 1-6 of the Basic Install section.
2. Locate an available set of expansion cables. Choose an unused port,
labeled A-H, on the rear of your SwitchView OSD unit. Plug the video
expansion cable connector into the blue port of your chosen channel.
Plug the PS/2 keyboard expansion cable connector into the purple
port. Plug the PS/2 mouse expansion cable connector into the green PS/2
port.
3. Plug the remaining end of the video expansion cable into the blue port
of the user console section on your second SwitchView OSD unit. Plug the
PS/2 keyboard expansion cable connector into the purple port. Plug
the PS/2 mouse expansion cable connector into the green port.
4. Repeat steps 2-3 for every cascaded SwitchView OSD unit in your system.
5. Power-up your SwitchView OSD units first, then power-up all
attached computers.