Avocent SWITCHVIEW OSD -, Инструкция по установке и эксплуатации

Страница: 38 / 56

32
SwitchView OSD Installer/User Guide
Setting the Scanning Order
1. From the main OSD Window, press the
Control
key twice or type
Alt-M
to access the Command Menu.
2. Choose ‘Scanning order’ from the menu.
3. Select either ‘Sequential order’ or ‘Alphanumeric order’.
4. Press
Enter
.
Turning Scanning On and Off
From the OSD menu.
1. From the main OSD Window, press the
Control
key twice or type
Alt-M
to access the Command Menu.
2. Select ‘Turn scanning ON’ or ‘Turn scanning OFF’ from the menu. This
is a toggle option - only one scanning option will show on the menu
at any one time.
3. Press
Enter
.
By keyboard hot-key sequence (System Administrator or non-
secure mode only)
The following key sequences control scanning.
Key Sequence Action
<CM> SG <Enter> Enables the scan Go command.
<CM>
SH
<Enter>
Enables the scan Halt command.