AvMap EKP-IV PRO Скачать руководство пользователя страница 82

Страница: 82 / 97

Fig. 15.4.4 - About page

If it is necessary to return your EKP-IV for repair, you must obtain a return authorization (RA)

number from C-MAP Aviation prior to shipping the system. Include with the EKP-IV a description

of the problem, your RA number, and your name and address. If your return shipping address is

different, please include it. All packages are to be returned postage paid. As we are not responsible

for packages in transit, we recommend you purchase insurance and tracking information.

15.6 SYStEM tESt

If you have connected your EKP-IV according to the instructions and chosen the proper menu

selections and are still having problems a RAM Clear will bring the system back to factory default

settings. Many times this will clear the errors and bring the EKP-IV back to operating condition. RAM

CLEAR can be found in the System Test Menu.

Note

The additional tests in the System Test Menu are intended for factory testing. Faulty findings within these menus
is not necessarily a true result, as factory settings and equipment are often used during these tests.

15.6.1 RAM Menu

Make sure the EKP-IV is turned Off. While pressing and holding any other key, turn the EKP-IV On.

A new menu will appear on the display. Use the cursor key to select the RAM Menu and press

‘ENTER’ to select RAM Test or RAM Clear.

• RAM Test

‘ENTER’ on RAM Test to verify the integrity of the RAM. If the message “ERROR” appears the RAM

is physically damaged.

• RAM Clear

‘ENTER’ on RAM Clear to to activate, press ‘ENTER’ again to confirm (at this time if you do not wish

to clear RAM press ‘CLEAR’).

Содержание EKP-IV PRO


































































































Результаты поиска

Содержание EKP-IV PRO

Отзывы:

Похожие инструкции для EKP-IV PRO

Бренды по названию

Популярные бренды

AvMap EKP-IV PRO, Руководство пользователя

Результаты поиска

Содержание EKP-IV PRO

Отзывы:

Похожие инструкции для EKP-IV PRO

Бренды по названию

Популярные бренды