AvMap EKP-IV PRO Скачать руководство пользователя страница 35

Страница: 35 / 97

In order to properly display TAWS, you’ll need to configure the EKP-IV. In MAP mode, press the

MENU key, select TERRAIN and press ENTER. A menu is displayed. Select TAWS and confirm by

pressing ENTER.

Important Note

: After TAWS is enabled; TAWS will not be displayed on the map. You will need to

acquire a position fix. The simulation mode can be used for training purposes. Press the MENU key

twice and select ‘Simulator’ from the Main Menu. Press ENTER, and set to “ON.”

Once TAWS has been enabled, the EKP-IV will display a legend in the lower left corner of the

display that depicts the TAWS color scheme:

Fig. 3.5.11.2- TAWS

Please Note

When TAWS is enabled, the color scheme is always displayed. The rules for TAWS are divided into two levels:

1. L1=500 ft. agl / M1=1,000 ft. agl / H1=2,000 ft. agl

2. L2=1,000 ft. agl / M2=2,000 ft. agl / H2=3,000 ft. agl

The TAWS rules allow you to calculate the color scheme to be used for depicting the OCH: Obstacle Clearance
Height.

the oCh

: Obstacle Clearance Height, is the difference of your own altitude (GPS Altitude) less

the Land Elevation:

OCH = ALT – LE

This calculation considers the Lowland and Highland definition, where:

- Lowland is the terrain under 3,000 feet of elevation

- Highland is the terrain over 3,000 feet of elevation

In the Lowland case, the TAWS colors will be red, yellow and green according to the following

values of the OCH:

Содержание EKP-IV PRO


































































































Результаты поиска

Содержание EKP-IV PRO

Отзывы:

Похожие инструкции для EKP-IV PRO

Бренды по названию

Популярные бренды

AvMap EKP-IV PRO, Руководство пользователя

Результаты поиска

Содержание EKP-IV PRO

Отзывы:

Похожие инструкции для EKP-IV PRO

Бренды по названию

Популярные бренды