0
2.5.2 NMEA outputs
The EKP-IV can be connected to external equipment that accepts NMEA0183 data input.
Once attached, the output of NMEA formatted position information can be enabled in the following
manner:
> ‘MENU’ 1 sec. + “COMMUNICATIONS” + ‘ENTER’ + “NMEA OUTPUT” + ‘ENTER’
The default setting is Off. The Output NMEA0183 messages are the following: APA, APB, BOD,
BWC, GGA, GSA, GSV, GLL, HSC, RMA, RMB, RMC, VTG, WCV, XTE (see Appendix F for more
details on NMEA sentences) BOD, BWC, GGA, GLL, HSC, RMA, RMB, RMC, VTG, WCV, XTE (see
Appendix F for more details on NMEA sentences).
Fig. 2.5.2 - NMEA Connections
2.5.3 Down or Up-load Flight Plans & tracks
The EKP-IV can also send and receive Flight Plans from the AvMap Flight
Planner or another device compatible with it through the serial port (the USB port is for factory
use only). This requires an optional data cable that can be purchased from your avionics dealer or
AvMap/Navigation for a proper connection to the device (see following figures).
Fig. 2.5.3 - Optional Data Cable
Fig. 2.5.3a - directional Communicatons
Содержание EKP-IV PRO
Страница 4: ... ...
Страница 79: ...79 15 3 DIMENSIONS Fig 15 3 Dimensions ...
Страница 90: ...90 Fig C ICAO Codes for areas included in the database Fig Ca ICAO Codes for sub continental areas ...