AvMap EKP-IV PRO, Руководство пользователя

Страница: 74 / 97

74
After pressing ‘ENTER’ a window appears; press ‘ENTER’ to confirm deletion or ‘CLEAR’ to abort
function. The message “DONE” will appear confirming the action.
14.4.7 Remaining track
The remaining track memory is displayed on the Track Setup Menu page. The number displayed
will be points, time, or distance based on the recording step selection.
14.5 UNItS SEt-UP
This sub-menu contains the various options that define how the EKP-IV displays units of
measurement.
> ‘MENU’ 1 sec. + “SYSTEM SETUP” + ‘ENTER’ + “UNITS SETUP” + ‘ENTER’
14.5.1 Distance Unit
> ‘MENU’ 1 sec. + “SYSTEM SETUP” + ‘ENTER’ + “UNITS SETUP” + ‘ENTER’ +
“DISTANCE” + ‘ENTER’
Distance measurements can be displayed in Statute Miles (SM), Nautical Miles (NM) or kilometers
(KM). The default setting is NM.
14.5.2 Speed Units
> ‘MENU’ 1 sec. + “SYSTEM SETUP” + ‘ENTER’ + “UNITS SETUP” + ‘ENTER’ +
“SPEED” + ‘ENTER’
Speed measurements can be displayed in miles per hour (MPH), Knots (KTS) or kilometers per hour
(KMH). The default setting is Knots.
14.5.3 Altitude Unit
> ‘MENU’ 1 sec. + “SYSTEM SETUP” + ‘ENTER’ + “UNITS SETUP” + ‘ENTER’ +
“ALTITUDE” + ‘ENTER’
Altitude measurements can be displayed in Feet (FT), Meters (MT) or Flight Levels (FL). The default
setting is Feet. It is possible for the altitude to be displaied negative.
Please Note: This may be due to the imprecision of the GPS engine vertical calculation. Caution
should be exercised; do not rely on GPS derived altitude.
14.5.4 Depth Unit
> ‘MENU’ 1 sec. + “SYSTEM SETUP” + ‘ENTER’ + “UNITS SETUP” + ‘ENTER’ +
“DEPTH” + ‘ENTER’
Depth measurements can be displayed in Feet (FT), Fathoms (FM) or Meters (MT). The default
setting is Feet.
14.5.5 Fuel Unit
Fuel units are used in the Fuel Consumption Calculator.
> ‘MENU’ 1 sec. + “SYSTEM SETUP” + ‘ENTER’ + “UNITS SETUP” + ‘ENTER’ + “FUEL”
+ ‘ENTER’