AvMap EKP-IV PRO Скачать руководство пользователя страница 14

Страница: 14 / 97

1.3.1 the Moving Map

Before starting, connect the EKP-IV to power and place the antenna with a clear view of the sky.

Turn On the unit pressing ‘POWER’. Press ‘ENTER’ to exit from the Warning page and enter the

Moving Map mode. The Moving Map is the default state displaying the Moving Map screen and the

Data Window. The Data Window contains navigation information boxes (See Chapter 3 for details

on Moving Map mode).

Note

: If no Fix is available, red dashed cross is displayed over the map for increased Pilot

Awareness.

to Change the Scale of the Moving Map

Use ‘ZOOM IN’ and ‘ZOOM OUT’ to change the map display scale.

to Select Position

Use the cursor key to scroll to the location you want.

1.3.2 the Main Menu

From Moving Map press ‘MENU’ for 1 second to display the Main Menu:

Fig. 1.3.2 - Main Menu

1.3.3 Moving Map Functions

The Moving Map operates in Auto Home, Auto Zoom, and Cursor Mode. The screen will behave

differently based on the mode of operation selected. The Auto Home mode will allow the user to

pan away from his present position to view other parts of the map, and return to present position

automatically when no buttons are pushed for a pre-determined amount of seconds. Auto Zoom

mode will keep your present position, and your destination in the screen at all times. The screen

will automatically zoom in as you get closer. To shut off this function, simply select OFF.

The Cursor Mode (OFF Selected) will allow you to move the map to any position to view data or

details. To return to your present position, just press ‘CLEAR’ while in moving map.

The control for these functions is found in the Moving Map Menu, under Auto Position Mode.

Содержание EKP-IV PRO


































































































Результаты поиска

Содержание EKP-IV PRO

Отзывы:

Похожие инструкции для EKP-IV PRO

Бренды по названию

Популярные бренды

AvMap EKP-IV PRO, Руководство пользователя

Результаты поиска

Содержание EKP-IV PRO

Отзывы:

Похожие инструкции для EKP-IV PRO

Бренды по названию

Популярные бренды