AvMap EKP-IV PRO, Руководство пользователя

Страница: 29 / 97

9
The Auto Zoom mode is used to keep the fix position and the destination (Target) visible on the
map. The map is scrolled and zoomed automatically to keep the best view possible.
3.5.3 DAtA WINDoW MoDE
The Data Window is displayed on the top of the Moving Map. This window provides navigation
information relating to the Flight Plan and GPS data. This screen can be customized to allow you to
select the information based on your flying needs.
>‘MENU’ + “DATA WINDOW MODE” + ‘ENTER’
The following options are available for the data window display:
OFF
1-line - Provides three fields for data display.
-lines - Provides six fields for data display.
3-lines - Provides nine fields for data display.
HSI + Fields - Provides the HSI along with 6 data fields in the top half of the display window.
(Settings for the HSI display are selected in the HSI menu)
Fig. 3.5.3 - Data Window options
3.5.4 Setup Data Fields
You can select the item to be displayed in each of the fields of the Data Window. The following
figure displays the options available. The fields selected for each window mode option (1-line, -
lines, etc.) are independent; therefore, you can select different fields for each window view.
> ‘MENU’ + “SETUP DATA FIELDS” + ‘ENTER’
After pressing ‘ENTER’, a box in the Data Window will be highlighted. Using the cursor key, select
the box to be edited and press ‘ENTER’. The OPTIONS box will appear (see previous figure)
allowing you to select the item to display in the highlighted is box. Highlight the desired item from
the list and press ‘ENTER’ to accept. You can then scroll to another box and proceed as above.
Once all boxes are set up, press ‘CLEAR’ to exit.