Avid Technology 9320-65044-00, Руководство пользователя

Страница: 139 / 186

Chapter 11: Normal Mode Operations and Commands 133
To focus a plug-in in the Dynamics or EQ section:
1
Focus the plug-in’s track on the Focus Channel Strip by
pressing the track’s Select switch. The first dynamics and EQ
plug-ins on that track are automatically focused in the corre-
sponding D-Control section.
2
Press the Cycle switch in the Dynamics or EQ section to fo-
cus successive dynamics or EQ plug-ins on that channel. (The
No Insert option is always available.)
To focus a plug-in in the Custom Faders section:
1
Focus the plug-in’s track on the Focus Channel Strip by
pressing the track’s Select switch. The first plug-in that is not
a dynamics or EQ plug-in is automatically focused, and its
name appears in the Custom Faders display.
2
In the Custom Faders section, press the Bank/Cycle switch to
cycle through the plug-ins on the focused channel. (The No In-
sert option is always available.)
The plug-in whose name appears in the Custom Faders display
is then available for Custom Fader Plug-In mode. (See “Cus-
tom Fader Plug-In Mode” on page 153.)
Automation Safe Mode
The Automation Safe switch invokes a mode in which the By-
pass/Mute/Pre switch for each encoder and the channel Select
switch become Automation Safe switches. While in this mode,
pressing a Bypass/Mute/Pre switch on a plug-in or send pro-
tects any automation on that plug-in or send from being over-
written. Pressing a channel Select switch protects any auto-
mated parameters on that track from being overwritten.
In Automation Safe mode, the Automation Safe switch is lit.
While in this mode, the Bypass/Mute/Pre switch for any pro-
tected insert or send is lit, and the channel Select switch for
any protected channel is lit.
To toggle Automation Safe mode on and off:
1
Press the Automation Safe switch.
2
Press the channel Select switch on the tracks for which you
want to toggle automation safe status.
3
Press the Bypass/Mute/Pre switch for the plug-ins or sends
for which you want to toggle automation safe status.
4
Press the Automation Safe switch again to exit Automation
Safe mode.
Bypassing Plug-Ins
When a plug-in name is displayed on an encoder (in the top
level Inserts display), the encoder’s Bypass/Mute/Pre (B/M/P)
switch bypasses the corresponding plug-in. The B/M/P switch
lights when the insert or plug-in is bypassed.
To bypass a Plug-In:
1
Press the Inserts switch on the plug-in’s channel to display
the Insert names on the channel’s encoders.
2
Press the B/M/P switch that corresponds to the plug-in you
want to bypass. The B/M/P switch lights when the plug-in is
bypassed.
Making Plug-Ins Active/Inactive
When a plug-in name is displayed on an encoder (in the top
level Inserts display), it can be made inactive without entering
Make Inactive mode.
To toggle a plug-in active/inactive:
1
Press the Inserts switch on a channel strip to display the
names of the plug-ins on the channel’s encoders.
2
If the insert location for the plug-in that you want to make
active/inactive is not showing, press the Page Up or Page Down
switches on the channel where you want to make the assign-
ment until the appropriate location is displayed.
3
Hold Start (Windows) or Command
(Macintosh) and press the encoder Select switch for the
plug-in.
Muting Sends
You can mute sends directly from D-Control by setting the ap-
propriate mode for the Bypass/Mute/Pre switch.
To mute sends:
1
Press the Sends switch on the track to display Send names in
the channel encoders.
2
Press the Switch Mode switch to set the mode to Mute.
3
Press the B/M/P switch for the send you want to mute. The
red Mute LED lights to indicate that the send is muted.
Setting Send Pre-/Post-Fader Operation
You can set sends to pre-fader or post-fader operation directly
from D-Control, by setting the appropriate mode for the By-
pass/Mute/Pre switch.
To toggle sends between pre-fader and post-fader operation:
1
Press the Sends switch on the track to display Send names in
the channel encoders.
2
Press the Switch Mode switch to set the mode to Pre.
3
Press the B/M/P switch for the send you want to toggle. The
green Pre LED lights to indicate that the send is set for
pre-fader operation.