3
Warning. This is not a toy. If not properly controlled it
can cause injury or death and property damage.
Included Hardware: Aluminum spinner, fuel tank, aircraft grade aluminum
wing-tube, aluminum main gear, rubber wheels, tail wheel bracket, alumi-
num servo arms, aluminum stab tube for removable stab, control horns,
hinges, wheel pants, SAE bolts and nuts, much more.
Specifications:
Wingspan:
87"
Length:
75.5"
Flying Weight:
16lbs
Wing Area:
1411sq.in.
Engine Size:
50cc
CANISTER READY, COWL RING MOUNT, PRE-HINGE-SLOTTED SUR-
FACES, PUSH-RODS AND CONTROL LINKAGES INCLUDED, 5” POLISHED
SPINNER INCLUDED FUEL TANK, WHEELS, LANDING GEAR, MOUNTING
HARWARE, NUTS, BOLTS AND MORE – ALL INCLUDED
FULL PARTS SUPPORT IN STOCK
Additional equipment required:
Computer Radio with at least 4 channels
2 Elevator servos minimum 100 oz/in. of torque each
2 aileron servos, total torque required not less than 120 oz./in. per wing.
Rudder servo(s) at least 180 oz./in.
Throttle servo
Radio operated engine kill switch or servo operated choke strongly suggested
Single or dual radio battery packs at least 1650 mAh total
Switch[es] for receiver batteries
Miscellaneous servo extensions.
Flexing in linkage can and will cause flutter of the control surfaces which will
destroy the airplane in just a few seconds. Metal gear servos are required.
