19
Engine cooling and clearance
Run the pull-pull wires down the
fuselage, and make sure the ca-
bles are not rubbing on anything.
Attach the large aluminum servo
arm securely to an existing servo
wheel and attach cables with
hardware provided.
Cut out the cowl in the required spots
so you have plenty of clearance
around the muffler and cylinder.
Also open up the box on the bottom of
the cowl in order to cool the engine
during flight. If you do not provide
enough exit for the air, the engine will
overheat.
The installation of the tank (supplied)
and fuel lines is very straightforward.
Place a piece of foam under the tank
to prevent fuel foaming and strap it
with tie-wraps or Velcro.
