Avery Weigh-Tronix FLI 225, Руководство по обслуживанию

Страница: 53 / 110

FLSC 05 w/FLI 225 Instrument Service Manual 53
9 Calibrate the FLSC 05 with FLI 225
2. Select point 1 from the Set/View Angle Points screen.
The instrument displays both the live and the most recent stored raw
count values for the scale pitch and roll as well as for the current weight.
Figure 9.26 Sample Counts Pt 1
3. Press the Store softkey.
The instrument stores the value and returns to the
Set/View Angle Points screen.
4. Press the Down Arrow softkey to highlight Pt 2 No Wt Roll Left .
5. Press the Enter softkey.
6. Roll the forklift 5 degrees to the left.
7. Press the Store softkey.
The instrument stores the value and returns to the
Set/View Angle Points screen.
8. Press the Down Arrow softkey to highlight Pt 3 No Wt Roll Right .
9. Roll the forklift 5 degrees to the right.
10. Press the Store softkey.
The instrument stores the value and returns to the
Set/View Angle Points screen.
11. Press the Down Arrow softkey to highlight Pt 4 No Wt Pitch Forward .
12. Press the Enter softkey.
13. Tilt the forks 5 degrees forward.
14. Press the Store softkey.
The instrument stores the value and returns to the
Set/View Angle Points screen.
The last two or three digits of the “Live” counts value will continue to fluctuate.
Always return the lift truck and forks to a level condition before proceeding to the next
step. For example, do not tip both forward and to the side during any step in the
procedure.