Avery Weigh-Tronix FLI 225, Руководство по обслуживанию

Страница: 29 / 110

FLSC 05 w/FLI 225 Instrument Service Manual 29
7 Inputs
7.6 Inputs
The Inputs test checks if the remote input is working properly.
1. Begin with the input connected and in its default setting (off or on).
2. From the Diagnostics Manager screen, press the Up or Down Arrow softkey
as necessary to highlight Inputs .
3. Press the Enter softkey.
4. The Inputs Test screen is displayed with the current setting for each available
input.
5. Put the input device in the opposite setting (on or off).
The status of the input changes to reflect this difference.
6. Press the Esc or Enter softkey to return to the Diagnostics Manager module.
7.7 Seal Switch
This instrument has a Category 3 audit trail. For locations requiring a physical seal,
there is a seal switch located at S1 on the communications/power supply board.
Select Seal Switch from the Diagnostics Manager module to view the current status
(sealed or unsealed).
For information on sealing or unsealing the instrument, see Change Seal Status on
page 35 .
7.8 Error Log Viewer
The Error Log Viewer can assist you in diagnosing problems with the FLI 225
instrument or the FLSC 05 system by showing you a list of dates when errors occurred.
1. Select Error Log Viewer from the Diagnostics Manager module.
The Error Log is displayed.
Figure 7.9 Sample Error Log
By default, FLSC communications errors and Drift errors are disabled. See
Diagnostics Tools on page 78.