Avery Weigh-Tronix FLI 225, Руководство по обслуживанию

Страница: 27 / 110

FLSC 05 w/FLI 225 Instrument Service Manual 27
7 Keypad
7.2 Keypad
1. Select Keypad from the Diagnostics Manager module to test the function of
each key.
2. Press the Enter softkey.
The instrument prompts you to press a key.
During the Keypad Test , the name of the key will display while it is
pressed. If you press and hold the key, the function will remain onscreen
until you release the key.
3. Press the On / Off key to exit the test and return to Diagnostics Manager .
7.3 Display
1. Select Display from the Diagnostics Manager . The screen will flash the model
name in standard display followed by inverse (highlighted) and finally a solid
black screen and will repeat until
F1 or F4 is pressed.
2. Press the Enter softkey.
Figure 7.5 Test Screens
3. Press either the F1 or F4 key to end the test and return to the Diagnostics
Manager module.
7.4 Analog Option Card
The Analog Option Card test is not available on the FLSC 05 digital system. Refer to
the appropriate service manual for the QTLTSC or QTLTS.
7.5 Digital Carriage
Selecting Digital Carriage from the Diagnostics Manager lets you view the status of
the FLJ 100 digital Jbox and the scaled counts.
1. Access the Diagnostics Management module.
2. Press the Up or Down Arrow softkey as necessary to highlight
Digital Carriage