36
7.9 Sequence Dwell
Sequence Dwell lets you specify the amount of time that a camera image can stay
on the monitor or VCR before switching to different camera image. Different switching
timing can be selected for Monitor output and for VCR output. To change the timing
follow the following steps.
1
Press and Release the menu button to access the main menu.
2
Place cursor in front of “Sequence Dwell” and press and release the “SET”
button.
3
Sequence Dwell menu will pop up as shown in the figure below.
4
Place the cursor in front of MonOut Sequence and press and release the
“SET” button.
5
Select the sequencing trimming by pressing the “UP” or “DOWN” button.
6
Press the “Set” button after the selecting the desired trimming.
7
To Select the VCR out put sequence trimming move the cursor in front of
VCRout.
8
Select the desired timing by pressing the “Up” or “Down” buttons.
9
Exit out from all the menus to activate the selection.
ll
e
w
D
e
c
n
e
u
q
e
S
c
e
s
3
t
u
O
n
o
M
c
e
s
3
t
u
O
R
C
V
T
I
X
E
Figure 18: Sequence Dwell Menu
