31
By External or Internal Trigger
The QM can either adjust its recording speed with the VCR by Internal trigger or
can set the speed of the VCR by the external trigger. To set the speed with external or
internal trigger follow the following procedure.
NOTE: This option only work with the VCRs which support internal trigger input or external trigger output.
1
Under the main menu move the cursor in front of Normal Record mode and press
“SET” button.
2
Under the Normal Record mode menu move cursor in front of “Ext Trigger” and
turn “OFF” to enable External trigger or select “ON” to enable the Internal Trigger.
3
After making the selection exit out of all the menus.
Note: Select the recording speed if you choose to enable the external trigger.
Setting the Speed Manually
You can set the recording speed to Real Time, Virtual Real time, or the Time Lapse
manually by follow the following procedure.
1
Under the Alarm Record mode menu select “Set by Hour” and press “SET”.
2
The “Set by Hour “ Window will pop up on the screen.
3
Place the cursor in front of “Record Hour” and press “Set”.
4
Select the Recording time and press “SET” again.
5
Now place the cursor infront of “Record Mode” and press “SET”.
6
Press “Up” or “Down” button to chose Real Time, Virtual real Time, and Time
Lapse Mode.
7
If you choose the Time Lapse mode then place the cursor in front of the Record
density and press set.
8
Press “UP” or “DOWN” buttons to select from Single, Double , and Triple.
9
After making the selection exit out of all the menus.
Setting the Speed by the Field interval
Follow the steps to set the recording speed by field interval.
1
Under the Alarm record menu place the cursor in front of Set by Field Interval and
press “SET”.
2
Set by Field Interval window will pop up on the screen.
3
Move the cursor in front “of Record 1 out of” and select the field number by press-
ing “UP” or “DOWN” button.
4
After making the selection exit out of all the menus to activate the choice.
