28
7
Now move cursor in front “Record mode” and press and release the “SET”
button.
8
Cursor will start blinking again.
9
Press “UP” OR “DOWN” button until “ VIRTUAL REAL TIME” appears in
front of “Record mode”.
10
Press and release “SET” again.
11
Now exit in all the sub-menus to exit out of programming mode.
12
You are ready to record in Virtual Real time mode.
r
u
o
H
y
b
t
e
S
4
r
u
o
H
d
r
o
c
e
R
-
T
R
L
A
U
T
R
I
V
e
d
o
M
d
r
o
c
e
R
E
L
B
U
O
D
y
t
i
s
n
e
D
d
r
o
c
e
R
t
i
x
E
Figure 13: Set by Hour menu
Time Lapse Recording
1
In the Normal Record mode menu place your cursor in front of “Set by
Hour” and press and release “SET” button.
2
Normal Record Mode screen pop up on the as shown in figure 13.
3
Place your cursor in front of “Record Hour” and press and release “ZOOM
SET”.
4
Cursor will start blinking.
5
Select the recording speed by pressing “UP” or “DOWN” button.
6
Press and release the “SET” button. .
7
Now move cursor in front “Record mode” and press and release the “SET”
button.
8
Cursor will start blinking again.
9
Press “UP” or “DOWN” button until “ TIME LAPSE” appears in front of
record mode.
10
Press and release “SET” button again.
11
Move your cursor in front of “Record Density” and press and release the
“SET” button.
12
On blinking cursor select the desire recording density (e.g. single, double,
or triple).
13
After selecting the density press and release the “SET” button.
11
Exit out of all the menus to activate above selection.
12
You are ready to record in Time Lapse mode.
