19
An Internal clock circuit generates the time and date that is super imposed on the
monitor screens. After the clock is set, the date and time modes are displayed on the
monitor screens (live picture and multiplexed record). Under the Time & Date menu you
can turn the time and date display “ON” or “OFF”. Set the date format as YY/MM/DD or
MM/DD/YY or DD/MM/YY. You may also set the clock for AM/PM 12 hour time or mili-
tary or 24 hour European style time format. Set the time or set the time to factory de-
fault. Following subsections describe to set the above mentioned settings.
Display Time & Date on Screen
1
In “Time/Date” sub menu place the cursor in front of “T/D Display” and press and
release the “ SET” button .
2
Press the “UP” or “DOWN” buttons to select “ON” or “OFF”.
3
Press and release the “SET” button again .
4
To exit out of the Display Time & Date, place cursor in front of “Exit” and press
and release “SET” button.
5
To activate your selection place your cursor in front of “EXIT” in the main menu
and press and release the “SET” button.
Note: Selecting “OFF” will turn off “Time & Date” display.
e
t
a
D
/
e
m
i
T
N
O
y
a
l
p
s
i
D
D
/
T
r
u
o
H
2
1
t
a
m
r
o
F
e
m
i
T
Y
Y
/
D
D
/
M
M
t
a
m
r
o
F
e
t
a
D
e
t
a
D
/
e
m
i
T
t
e
S
e
t
a
D
/
e
m
i
T
t
e
s
e
R
t
i
x
E
Figure 6: Time/Date Menu
Selecting Time Format
1
Place the cursor in front of “Time Format” and press and release the “SET” but-
ton.
2
Cursor will start blinking.
3
Now push “Up” or “Down” button to select “12” or “24” time display mode.
4
After selecting the desired selection press and release the “SET” button that will
stop cursor to blink.
5
Exit out from all the menus to activate your selection.
7.2 Time & Date
