AVC Technology Prestige 100 Solo Скачать руководство пользователя страница 3

Страница: 3 / 68

NOTE

This manual contains important information with respect to the installation and set-up of the boiler.

This manual must be provided to the installer, who will keep it in a safe place.

We accept no liability should any damage result from the failure to comply with the instructions

contained in this technical manual.

Essential recommendations for safety

•

It is prohibited to carry out any modifications to the appliance without the

manufacturer’s prior and written agreement.

•

The appliance must be set up by a qualified installer, in accordance with applicable

standards and regulations.

•

The installation must comply with the instructions contained in the boiler's

installation manual and with the standards and regulations applicable to

installations.

•

Failure to comply with the instructions in this manual could result in personal

injury or a risk of environmental pollution.

•

The manufacturer declines all liability for any damage caused as a result of

incorrect installation or in the event of the use of appliances or accessories that are

not specified by the manufacturer.

Essential recommendations for the correct operation of the appliance

•

To guarantee the correct operation of the installation, it is essential to carry out the

adjustments in accordance with the instructions in this manual.

•

In order to ensure that the appliance operates correctly, it is essential to inspect

and service the boiler every year.

•

Faulty parts may only be replaced by genuine factory parts.

General remark

•

The manufacturer reserves the right to change the technical characteristics and

features of its products without prior notice.

System Control - ACVMax: 660Y2800 • C

If you smell gas:

Immediately isolate the gas supply.

- Open windows and doors to ventilate the area.

- Do not use any electrical appliances and do not operate any switches.

Immediately notify your gas supplier and/or your installer.

IMPORTANT INSTRUCTIONS - READ BEFORE PROCEEDING

Essential recommendations for safety

•

This document is intended to be used by a factory trained and qualified heating

contractor or service technician only. Read all instructions within this document and

within the PRESTIGE Boiler Installation and Maintenance Manual before proceeding.

•

It is recommended to follow the procedures in the steps given. Skipping or missing

procedural steps could result in severe personal injury, death or substantial property

damage.

•

This appliance is not intended for use by persons (including children) with reduced

physical, sensory or mental capabilities, or lack of experience and knowledge, unless

supervised or unless they have been given instruction concerning the use of the

appliance by a person responsible for their safety.

•

Children should be supervised to ensure that they do not play with the appliance.

RECOMMENDATIONS

Содержание Prestige 100 Solo





































































Результаты поиска

Содержание Prestige 100 Solo

Отзывы:

Бренды по названию

Популярные бренды

AVC Technology Prestige 100 Solo, Руководство пользователя

Результаты поиска

Содержание Prestige 100 Solo

Отзывы:

Бренды по названию

Популярные бренды