AVC Technology Prestige 100 Solo Скачать руководство пользователя страница 22

Страница: 22 / 68

System Control - ACVMax: 660Y2800 • C

APPLIANCE DESCRIPTION AND OPERATION

CH & DHW Settings / Boiler Settings (cont’d)

Flexible Pump Config

Flex. Relay 1 (CH)

Flex. Relay 2 (DHW)

Flex. Relay 3 (P3)

Flex. Relay 4 (ERR)

Flex. Relay 5 (Flame)

Flex. Relay 6 (P4)

Flex. Relay 1 (CH)

CH1 / CV1

CH2 / CV2

Off

DHW / ECS / SWW

Off

MIX OPEN Off

MIX CLOSE

Off

ERROR Off

FLAME Off

Each relay function has several options. Activation will happen when one of the following options has been chosen:

CH1, CH2, DHW, MIX OPEN, MIX CLOSE, ERROR, FLAME.

More than one action can be chosen for one relay (one relay can become active for CH1 , CH2 and DHW demand when needed.)

When selecting

CH 1

, the relay is activated at CH 1 demand.

Press the

DOWN

buttons to scroll through the settings, then on

to toggle between the On/Off status of each

relay. Then go to the next line.

For pump functions only select flexible relays 1, 2, 3 and 6. Flexible relays 4 and 5 are not suitable to switch pumps.

Please refer to "Configuration of regular systems" on page 26 for further explanation.

Flex. Relay 1 (CH)

CH1 / CV1

CH2 / CV2

Off

DHW / ECS / SWW

Off

MIX OPEN Off

MIX CLOSE

Off

ERROR Off

FLAME Off

When selecting

CH 2

, the relay is activated at CH 2 demand.

Press the

DOWN

buttons to scroll through the settings, then on

to toggle between the On/Off status of each

relay. Then go to the next line.

Flex. Relay 1 (CH)

CH1 / CV1

CH2 / CV2

Off

DHW / ECS / SWW

Off

MIX OPEN Off

MIX CLOSE

Off

ERROR Off

FLAME Off

When selecting DHW, the relay is activated at DHW demand.

Press the

DOWN

buttons to scroll through the settings, then on

to toggle between the On/Off status of each

relay. Then go to the next line.

Flex. Relay 1 (CH)

CH1 / CV1

CH2 / CV2

Off

DHW / ECS / SWW

Off

MIX OPEN Off

MIX CLOSE

Off

ERROR Off

FLAME Off

When selecting

Mix Open

, the Mixing valve open input is activated. Provided there is a mixing valve in the

hydraulic circuit, runtime is assumed to be 120 sec.

Press the

DOWN

buttons to scroll through the settings, then on

to toggle between the On/Off status of each

relay. Then go to the next line.

By pushing the

RIGHT

button then

OK,

you go back to the previous

screen, but THE CHANGED VALUES

ARE NOT STORED in the memory

(Quick escape route).

To save your changes, make sure

to scroll down to the last line of the

screen and to select

Save & Exit

Then press on

to activate the

function.

Содержание Prestige 100 Solo





































































Результаты поиска

Содержание Prestige 100 Solo

Отзывы:

Бренды по названию

Популярные бренды

AVC Technology Prestige 100 Solo, Руководство пользователя

Результаты поиска

Содержание Prestige 100 Solo

Отзывы:

Бренды по названию

Популярные бренды