Avaya W310, Справочник по командам

Страница: 312 / 440

Chapter 11 W310 Port Commands
296 Avaya W310 Command Reference Guide
Related Commands:
Use the set port channel command to enable or disable a Link Aggregation Group
(LAG) interface on the switch.
show port classification
User level: privileged, supervisor.
Use the
show port classification
command to display a port’s classification:
valuable or regular.
Syntax:
The syntax for this command is:
show port classification [<mod_num>[/<port_num>]]
Example:
Related Commands:
Use the
set port classification
command to set the port classification to either
regular or valuable.
Syntax Description
[<mod_num>[/
<port_num>]] 1/port number or range of port numbers. To specify a range of
ports, use a hyphen between the two port numbers. For example:
•
To specify port 1, type 1/1
• To specify ports 1 to 5, type 1/1-5
If you do not specify a number, all ports are displayed.
W310-1> show port classification 1/8
Port Port Classification
------ ---------------------
1/8 regular
W310-1> show port classification 1/9
Port Port Classification
------ ---------------------
1/9 valuable