Avaya W310, Справочник по командам

Страница: 292 / 440

Chapter 11 W310 Port Commands
276 Avaya W310 Command Reference Guide
set port point-to-point admin status
User level: privileged, supervisor.
Use the
set port point-to-point admin status
command to specify whether
a port is connected to a shared LAN segment or a point-to-point LAN segment. A point-to-
point LAN segment is connected to exactly one other bridge (normally with a direct cable
between them). Only point-to-point links and edge ports can rapidly transition to forwarding
state.
If you set this field to Auto, the switch automatically detects whether the port is connected to
a shared link or a point-to-point link. Ports operating in half duplex are set to non-point-to-
point, and ports operating in full duplex are set to point-to-point. You can, however,
manually set the type of link.
Syntax:
The syntax for this command is:
set port point-to-point admin status <module/port> {force-true
| force-false | auto}
Syntax Description
<module/port> 1/port number or range of port numbers. To specify a range of
ports, use a hyphen between the two port numbers. For example:
•
To specify port 1, type 1/1
• To specify ports 1 to 5, type 1/1-5
force-true Defines the port as connected to a point-to-point link.
force-false Defines the port as connected to a shared LAN segment.
auto Automatically detects whether the port is connected to a shared
link or a point-to-point link. Ports operating in half duplex are
set to non-point-to-point, and ports operating in full duplex are
set to point-to-point
If you select this setting, the
point-to-point oper
state
field of the
show port point-to-point
status
command displays the link type that is detected.