Avaya W310, Справочник по командам

Страница: 408 / 440

Chapter 17 CLI User Interface Commands
392 Avaya W310 Command Reference Guide
Example:
• To set the time until the system disconnects an idle session automatically to 20 minutes:
• To disable the automatic disconnection of idle sessions:
Related Commands:
Use the show timeout command to display the time in minutes that the CLI can remain
idle before timing out. If set to 0, there is no time-out limit
set terminal recovery password
User level: privileged, supervisor.
Use the
set terminal recovery password enable
command to enable or
disable the recovery password feature.
!
This command can be run only from the console port on the device.
Syntax:
The syntax for this command is:
set terminal recovery password {enable | disable}
Example:
W310-1# set logout 20
Sessions will be automatically logged out after 20 minutes
of idle time.
W310-1# set logout 0
Sessions will not be automatically logged out.
W310-1# set terminal recovery password enable
Done!