Avaya W310, Справочник по командам

Страница: 32 / 440

Chapter 3 Configuration File Commands
16 Avaya W310 Command Reference Guide
copy module-config tftp
User level: privileged, supervisor.
Use the
copy module-config tftp
command to upload the W310 configuration
from the current NVRAM running configuration to a TFTP server.
If an error occurred during upload (you can check this using the command
show tftp
upload status
) you must fix the problem. The following is a list of possible problems:
Syntax:
The syntax for this command is:
copy module-config tftp <filename> <ip> <module number>
If this is the problem:
Then perform the upload procedure again
twice as follows:
You did not create an empty text file
at the destination server (0 Bytes). Delete the destination file and recreate a
correctly named empty file at the destination
server (0 bytes)
You do not have the correct path to
the file. Type the command
copy module-config
tftp
for the first time.
The destination server is not active/
on. Delete the destination file and recreate a
correctly named empty file at the destination
server (0 bytes)
The destination server is unreachable. Type the command
copy module-config
tftp
again, a second time.
Syntax Description
<filename> The destination file name (full path)
<ip> The IP address of the TFTP server
<module number> 1