manualshive.com logo in svg

Avaya W310, Справочник по командам

"Avaya W310" - это беспроводной IP телефон, идеально подходящий для офисных сред. Для подробного ознакомления с функциями и настройками устройства, скачайте бесплатное "Command Reference Manual" с нашего сайта. manualshive.com - ваш источник бесплатных руководств для пользователей.

Поделиться
Скачать
background image

Copyright 2004, Avaya Inc.
All Rights Reserved

Notice

Every effort was made to ensure that the information in this document 
was complete and accurate at the time of printing. However, 
information is subject to change.

Warranty

Avaya Inc. provides a limited warranty on this product. Refer to your 
sales agreement to establish the terms of the limited warranty. In 
addition, Avaya’s standard warranty language as well as information 
regarding support for this product, while under warranty, is available 
through the following Web site: 

http://www.avaya.com/support

.

How to Get Help

For additional support telephone numbers, go to the Avaya support 
Web site: 

http://www.avaya.com/support

. If you are:

• Within the United States, click the 

Escalation Management

 link. 

Then click the appropriate link for the type of support you need.

• Outside the United States, click the 

Escalation Management

 link

. 

Then click the 

International Services

 link that includes telephone 

numbers for the international Centers of Excellence.

Providing Telecommunications Security

Telecommunications security (of voice, data, and/or video 
communications) is the prevention of any type of intrusion to (that is, 
either unauthorized or malicious access to or use of) your company's 
telecommunications equipment by some party.

Your company's “telecommunications equipment” includes both this 
Avaya product and any other voice/data/video equipment that could be 
accessed via this Avaya product (that is, “networked equipment”).

An “outside party” is anyone who is not a corporate employee, agent, 
subcontractor, or is not working on your company's behalf. Whereas, a 
“malicious party” is anyone (including someone who may be 
otherwise authorized) who accesses your telecommunications 
equipment with either malicious or mischievous intent.

Such intrusions may be either to/through synchronous (time-
multiplexed and/or circuit-based) or asynchronous (character-, 
message-, or packet-based) equipment or interfaces for reasons of:

• Utilization (of capabilities special to the accessed equipment)
• Theft (such as, of intellectual property, financial assets, or toll 

facility access)

• Eavesdropping (privacy invasions to humans)
• Mischief (troubling, but apparently innocuous, tampering)
• Harm (such as harmful tampering, data loss or alteration, 

regardless of motive or intent)

Be aware that there may be a risk of unauthorized intrusions 
associated with your system and/or its networked equipment. Also 
realize that, if such an intrusion should occur, it could result in a 
variety of losses to your company (including but not limited to, 
human/data privacy, intellectual property, material assets, financial 
resources, labor costs, and/or legal costs).

Responsibility for Your Company’s Telecommunications Security

The final responsibility for securing both this system and its 
networked equipment rests with you - Avaya’s customer system 
administrator, your telecommunications peers, and your managers. 
Base the fulfillment of your responsibility on acquired knowledge and 
resources from a variety of sources including but not limited to:

• Installation documents
• System administration documents
• Security documents
• Hardware-/software-based security tools
• Shared information between you and your peers
• Telecommunications security experts

To prevent intrusions to your telecommunications equipment, you and 
your peers should carefully program and configure:

• Your Avaya-provided telecommunications systems and their 

interfaces

• Your Avaya-provided software applications, as well as their 

underlying hardware/software platforms and interfaces

• Any other equipment networked to your Avaya products

TCP/IP Facilities

Customers may experience differences in product performance, 
reliability and security depending upon network configurations/design 
and topologies, even when the product performs as warranted.

Standards Compliance

Avaya Inc. is not responsible for any radio or television interference 
caused by unauthorized modifications of this equipment or the 
substitution or attachment of connecting cables and equipment other 
than those specified by Avaya Inc. The correction of interference 
caused by such unauthorized modifications, substitution or attachment 
will be the responsibility of the user. Pursuant to Part 15 of the Federal 
Communications Commission (FCC) Rules, the user is cautioned that 
changes or modifications not expressly approved by Avaya Inc. could 
void the user’s authority to operate this equipment.

Product Safety Standards

This product complies with and conforms to the following 
international Product Safety standards as applicable:

Safety of Information Technology Equipment, IEC 60950, 3rd Edition 
including all relevant national deviations as listed in Compliance with 
IEC for Electrical Equipment (IECEE) CB-96A.

Safety of Information Technology Equipment, CAN/CSA-C22.2
No. 60950-00 / UL 60950, 3rd Edition

Содержание W310

























































































































































































































































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для W310

M-system R7G-SC-SHL Instruction Manual preview
R7G-SC-SHL
Бренд: M-system Страницы: 7
AudioCodes MP-272-DB Quick Manual preview
MP-272-DB
Бренд: AudioCodes Страницы: 2
Johnson Controls MAP 1810 Quick Start Manual preview
MAP 1810
Бренд: Johnson Controls Страницы: 15
EAE DA110 Product Manual preview
DA110
Бренд: EAE Страницы: 22
Amit IOG761 User Manual preview
IOG761
Бренд: Amit Страницы: 395
Soyal AR-727 Manual preview
AR-727
Бренд: Soyal Страницы: 4
LG V-NET PLNWKB000 Installation Manual preview
V-NET PLNWKB000
Бренд: LG Страницы: 19
LG PWFMDB200 Installation Manual preview
PWFMDB200
Бренд: LG Страницы: 23
LG V-NET PLNWKB000 Installation & User Manual preview
V-NET PLNWKB000
Бренд: LG Страницы: 183
LG PSNFP14A0 Installation Manual preview
PSNFP14A0
Бренд: LG Страницы: 11
Xentino HSP500 User Manual preview
HSP500
Бренд: Xentino Страницы: 126
Pfeiffer Vacuum TIC 253 Operating Instructions Manual preview
TIC 253
Бренд: Pfeiffer Vacuum Страницы: 20
Next Level Security Systems GW-4000 Specifications preview
GW-4000
Бренд: Next Level Security Systems Страницы: 10
Hewlett Packard Enterprise Aruba 9012 Installation Manual preview
Aruba 9012
Бренд: Hewlett Packard Enterprise Страницы: 26
AudioCodes MediaPack 1 Series Quick Setup Manual preview
MediaPack 1 Series
Бренд: AudioCodes Страницы: 10
AudioCodes MediaPack MP-112 User Manual preview
MediaPack MP-112
Бренд: AudioCodes Страницы: 622
Planet WSG-500 User Manual preview
WSG-500
Бренд: Planet Страницы: 162
Fluke 3502 FC Getting Started Manual preview
3502 FC
Бренд: Fluke Страницы: 20

Бренды по названию

Популярные бренды

Загрузить еще бренды