Avaya W310, Справочник по командам

Страница: 79 / 440

Chapter 6
Avaya W310 Command Reference Guide 63
Example:
This example shows how to add a default route to the IP routing table:
Related Commands:
• Use the
clear ip route
command to clear an entry in the IP routing table.
• Use the show ip route command to display IP routing table entries.
show interface
User level: user, privileged, supervisor
Use the
show interface
command to display information on network interfaces.
Syntax:
The syntax for this command is:
show interface
W310-1# set ip route 0.0.0.0 192.168.1.1
destination = 0.0.0.0 gateway = 192.168.1.1
ROUTE NET TABLE
destination gateway flags Refcnt Use Interface
------------------------------------------------------------------------
0.0.0.0 192.168.1.1 1 1 3199 se0
127.1.1.0 127.1.1.1 1 8 7606 se1
------------------------------------------------------------------------
ROUTE HOST TABLE
destination gateway flags Refcnt Use Interface
------------------------------------------------------------------------
127.0.0.1 127.0.0.1 5 2 131 lo0
10.10.10.10 192.168.1.1 7 0 0 se0
------------------------------------------------------------------------