Avaya S8510, Руководство пользователя, Страница: 73 / 84

Replacing the SAMP on the Avaya S8510 server
03-602953 Issue 1 June 2008 73
Install the replacement SAMP in the S8510 server
To install the replacement SAMP in the S8510 server, refer to Figure 23: Removing/replacing
the S8510 SAMP card on page 72 and using the steps in reverse order:
1. Connect the ribbon portion of the replacement SAMP cable assembly to the motherboard
(Note 4 in Figure 23: Removing/replacing the S8510 SAMP card on page 72).
2. Carefully grasp the replacement SAMP by the outer edges and align it with the opening on
the PCI expansion slot riser assembly. Press the SAMP firmly into the expansion slot (Note
3 in
Figure 23: Removing/replacing the S8510 SAMP card on page 72).
!
CAUTION:
CAUTION:
Make sure the SAMP card is completely seated in the expansion slot before you
apply power to the S8510 server. Incomplete insertion might cause damage to
the system board or to the SAMP card.
3. Connect the other end of the replacement SAMP cable assembly to the SAMP (Note 2 in
Figure 23: Removing/replacing the S8510 SAMP card on page 72).
4. Press the PCI expansion card riser release latches (Note 1 in Figure 23: Removing/
replacing the S8510 SAMP card on page 72) to secure the SAMP and the riser assembly.
Replace the cover on the S8510
To replace the cover on the S8510 server use Figure 24: Replacing the cover on the S8510
server on page 74 in reverse order.
!
WARNING:
WARNING:
Ensure that the SAMP cable and any other internal cables are clear of the cover
before replacing it on the server.
1. Place the cover on top of the server, aligning it with the J hooks on the sides.