Job Aid: Replacing the Avaya S8510 server
16 Job Aids for Field Replacements (FRUs) for the Avaya S8510 Server
Remove the SAMP from the defective S8510 server
!
CAUTION:
CAUTION:
The SAMP has separate power source than the server’s. You must remove all
power from the server and the SAMP card before starting this procedure.
ELECTROSTATIC ALERT:
ELECTROSTATIC ALERT:
Take precautions against electrostatic discharge: wear a wrist strap connected to
an approved ground.
The SAMP card resides in a PCI expansion card riser at the rear of the S8510 server. To
remove the defective SAMP from the riser:
1. Lift the release latches located at the left side of the PCI expansion card riser as shown in
.
Figure 4: Removing/replacing the S8510 SAMP card
Figure notes:
1.
Press the release latches
on the PCI expansion
card riser.
3.
Remove the SAMP from the
expansion slot.
2.
Remove the cable from
the SAMP.
4.
Remove the ribbon cable from the
motherboard.
hw85smpr LAO 040308
1
2
3
4