Avaya S8510, Руководство пользователя, Страница: 51 / 84

Install the replacement dual NIC in the S8510 server
03-602953 Issue 1 June 2008 51
Install the replacement dual NIC in the S8510 server
To install the replacement dual NIC in the S8510 server:
1. Carefully grasp the replacement NIC by its edges and position it so that the card-edge
connector aligns with the expansion-card slot on the PCI riser board (Note 2 in
Figure 13: Removing and replacing the dual NIC in the S8510 server on page 50).
2. Insert the card-edge connector firmly into the PCI expansion card riser until the card is fully
seated.
3. Close the PCI expansion card riser latch (Note 1 in Figure 13: Removing and replacing the
dual NIC in the S8510 server on page 50).
Replace the cover on the S8510
To replace the cover on the S8510 server use Figure 14: Replacing the cover on the S8510
server on page 52 in reverse order.
!
WARNING:
WARNING:
Ensure that the SAMP cable and any other internal cables are clear of the cover
before replacing it on the server.
1. Place the cover on top of the server, aligning it with the J hooks on the sides.