Avaya S6200 Скачать руководство пользователя страница 5 | Manualshive

Страница: 5 / 60

Avaya S6200 Скачать руководство пользователя страница 5

Issue 1 July 2006

5

Chapter 1: Getting Started

The Avaya S6200/S6500/S6800 Conferencing Server provides a highly scalable, highly
configurable, audio conferencing facility. The S6x00 media servers are SIP-based voice and
web conferencing solutions that extend Avaya's tele-conferencing applications; including
reservation-less, attended, event, mobile, and web conferencing, to support IP network
implementations. This solution offers a flexible, comprehensive, conferencing solution in a pure
IP environment.

Scope

This document describes only the installation and connection of the S6200/S6500/S6800
Conferencing Server chassis and associated media servers. After the equipment is installed
and connected to the LAN and network, the servers are configured by Avaya Support using
LAN or modem connections.

Audience

This document is intended for the technician who is responsible for installing the S6200/S6500/
S6800 Conferencing Server and associated media servers, and connecting the necessary
control LAN and media network cables. This document includes additional information for
identifying equipment needing upgrade, and for troubleshooting the installation.

This document may be released to the customer if that function is provided by customer
personnel.

Users of this guide should have basic knowledge of UNIX shell commands and resources,
Windows® 2003 Server Edition network setup, and S6200/S6500/S6800 Conferencing Server
features.

«
...
3
4
5
6
7
...
»

Содержание S6200





























































Отзывы:

Нет отзывов