Avaya S6200, Руководство пользователя, Страница: 21 / 60

Issue 1 July 2006 21
Chapter 2: Installing S6x00 Hardware
This chapter describes hardware installation procedures.
Installation consists of the following steps:
1. Verify installation of power, thermal management, LAN, and network connections.
2. Verify receipt of necessary hardware and cables.
3. Mount hardware to racks or as specified.
4. Connect power, keyboard/video/mouse, modems, LAN, and network connections.
5. Verify system operation.
6. Notify Support Help Desk that system is ready to be configured. Note any discrepancies
between installed facilities and Site Survey.
Steps 1 and 2 were covered in Chapter 1: Getting Started . This chapter covers steps 3 through
6.
Before You Begin
You should have a working knowledge of teleconferencing concepts, customer requirements,
telecommunication protocols (TCP/IP, VOIP/SIP), and UNIX commands.
Electrostatic Discharge (ESD) Precautions
If the replacement of any system board is required, you must adhere to industry-standard ESD
precautions.
When repairing equipment in the field, the minimum equipment necessary for ESD protection is:
●
Anti-static conductive mat with grounding cable.
●
Wrist strap with grounding cable.
●
ESD protective storage bags or other suitable containers.