Avaya J169 страница 5 Скачать руководство пользователя

Страница: 5 / 203

Radiation Exposure Statement

This equipment complies with FCC radiation exposure limits set forth

for an uncontrolled environment . This equipment should be installed

and operated with minimum distance of 8 in or 20 cm between the

radiator and your body. This transmitter must not be co-located or

operating in conjunction with any other antenna or transmitter.

EU Countries

This device when installed complies with the essential requirements

and other relevant provisions of EMC Directive 2014/30/EU and LVD

Directive 2014/35/EU. A copy of the Declaration may be obtained

from

http://support.avaya.com

or Avaya Inc., 4655 Great America

Parkway, Santa Clara, CA 95054–1233 USA.

WiFi transmitter

• Frequencies for 2412-2472 MHz, transmit power: 17.8 dBm

• Frequencies for 5180-5240 MHz, transmit power: 19.14 dBm

General Safety Warning

• Use only the Avaya approved Limited Power Source power

supplies specified for this product.

• Ensure that you:

- Do not operate the device near water.

- Do not use the device during a lightning storm.

- Do not report a gas leak while in the vicinity of the leak.

- For Accessory Power Supply – Use Only Limited Power

Supply Phihong Technology Co. Ltd. Model:

PSAC12R-050, Output: 5VDC, 2.4A.

Trademarks

The trademarks, logos and service marks (“Marks”) displayed in this

site, the Documentation, Hosted Service(s), and product(s) provided

by Avaya are the registered or unregistered Marks of Avaya, its

affiliates, its licensors, its suppliers, or other third parties. Users are

not permitted to use such Marks without prior written consent from

Avaya or such third party which may own the Mark. Nothing

contained in this site, the Documentation, Hosted Service(s) and

product(s) should be construed as granting, by implication, estoppel,

or otherwise, any license or right in and to the Marks without the

express written permission of Avaya or the applicable third party.

Avaya is a registered trademark of Avaya Inc.

All non-Avaya trademarks are the property of their respective owners.

Linux

is the registered trademark of Linus Torvalds in the U.S. and

other countries.

Содержание J169












































































































































































































Результаты поиска

Содержание J169

Отзывы:

Похожие инструкции для J169

Бренды по названию

Популярные бренды

Avaya J169, Установка и администрирование

Результаты поиска

Содержание J169

Отзывы:

Похожие инструкции для J169

Бренды по названию

Популярные бренды