background image

Copyright

Except where expressly stated otherwise, no use should be made of

materials on this site, the Documentation, Software, Hosted Service,

or hardware provided by Avaya. All content on this site, the

documentation, Hosted Service, and the product provided by Avaya

including the selection, arrangement and design of the content is

owned either by Avaya or its licensors and is protected by copyright

and other intellectual property laws including the sui generis rights

relating to the protection of databases. You may not modify, copy,

reproduce, republish, upload, post, transmit or distribute in any way

any content, in whole or in part, including any code and software

unless expressly authorized by Avaya. Unauthorized reproduction,

transmission, dissemination, storage, and or use without the express

written consent of Avaya can be a criminal, as well as a civil offense

under the applicable law.

Virtualization

The following applies if the product is deployed on a virtual machine.

Each product has its own ordering code and license types. Note,

unless otherwise stated, that each Instance of a product must be

separately licensed and ordered. For example, if the end user

customer or Avaya Channel Partner would like to install two

Instances of the same type of products, then two products of that

type must be ordered.

Third Party Components

“Third Party Components” mean certain software programs or

portions thereof included in the Software or Hosted Service may

contain software (including open source software) distributed under

third party agreements (“Third Party Components”), which contain

terms regarding the rights to use certain portions of the Software

(“Third Party Terms”). As required, information regarding distributed

Linux OS source code (for those products that have distributed Linux

OS source code) and identifying the copyright holders of the Third

Party Components and the Third Party Terms that apply is available

in the products, Documentation or on Avaya’s website at: 

https://

support.avaya.com/Copyright

 or such successor site as designated

by Avaya. The open source software license terms provided as Third

Party Terms are consistent with the license rights granted in these

Software License Terms, and may contain additional rights benefiting

You, such as modification and distribution of the open source

software. The Third Party Terms shall take precedence over these

Software License Terms, solely with respect to the applicable Third

Party Components to the extent that these Software License Terms

impose greater restrictions on You than the applicable Third Party

Terms.

The following applies only if the H.264 (AVC) codec is distributed with

the product. THIS PRODUCT IS LICENSED UNDER THE AVC

PATENT PORTFOLIO LICENSE FOR THE PERSONAL USE OF A

CONSUMER OR OTHER USES IN WHICH IT DOES NOT RECEIVE

REMUNERATION TO (i) ENCODE VIDEO IN COMPLIANCE WITH

THE AVC STANDARD (“AVC VIDEO”) AND/OR (ii) DECODE AVC

VIDEO THAT WAS ENCODED BY A CONSUMER ENGAGED IN A

PERSONAL ACTIVITY AND/OR WAS OBTAINED FROM A VIDEO

PROVIDER LICENSED TO PROVIDE AVC VIDEO. NO LICENSE IS

GRANTED OR SHALL BE IMPLIED FOR ANY OTHER USE.

ADDITIONAL INFORMATION MAY BE OBTAINED FROM MPEG LA,

L.L.C. SEE 

HTTP://WWW.MPEGLA.COM

.

Service Provider

THE FOLLOWING APPLIES TO AVAYA CHANNEL PARTNER’S

HOSTING OF AVAYA PRODUCTS OR SERVICES. THE PRODUCT

OR HOSTED SERVICE MAY USE THIRD PARTY COMPONENTS

SUBJECT TO THIRD PARTY TERMS AND REQUIRE A SERVICE

PROVIDER TO BE INDEPENDENTLY LICENSED DIRECTLY FROM

THE THIRD PARTY SUPPLIER. AN AVAYA CHANNEL PARTNER’S

HOSTING OF AVAYA PRODUCTS MUST BE AUTHORIZED IN

WRITING BY AVAYA AND IF THOSE HOSTED PRODUCTS USE

OR EMBED CERTAIN THIRD PARTY SOFTWARE, INCLUDING

BUT NOT LIMITED TO MICROSOFT SOFTWARE OR CODECS,

THE AVAYA CHANNEL PARTNER IS REQUIRED TO

INDEPENDENTLY OBTAIN ANY APPLICABLE LICENSE

AGREEMENTS, AT THE AVAYA CHANNEL PARTNER’S EXPENSE,

DIRECTLY FROM THE APPLICABLE THIRD PARTY SUPPLIER.

WITH RESPECT TO CODECS, IF THE AVAYA CHANNEL

PARTNER IS HOSTING ANY PRODUCTS THAT USE OR EMBED

THE G.729 CODEC, H.264 CODEC, OR H.265 CODEC, THE

AVAYA CHANNEL PARTNER ACKNOWLEDGES AND AGREES

THE AVAYA CHANNEL PARTNER IS RESPONSIBLE FOR ANY

AND ALL RELATED FEES AND/OR ROYALTIES. THE G.729

CODEC IS LICENSED BY SIPRO LAB TELECOM INC. SEE 

WWW.SIPRO.COM/CONTACT.HTML

. THE H.264 (AVC) CODEC IS

LICENSED UNDER THE AVC PATENT PORTFOLIO LICENSE FOR

THE PERSONAL USE OF A CONSUMER OR OTHER USES IN

WHICH IT DOES NOT RECEIVE REMUNERATION TO: (I) ENCODE

VIDEO IN COMPLIANCE WITH THE AVC STANDARD (“AVC

VIDEO”) AND/OR (II) DECODE AVC VIDEO THAT WAS ENCODED

BY A CONSUMER ENGAGED IN A PERSONAL ACTIVITY AND/OR

WAS OBTAINED FROM A VIDEO PROVIDER LICENSED TO

PROVIDE AVC VIDEO. NO LICENSE IS GRANTED OR SHALL BE

IMPLIED FOR ANY OTHER USE. ADDITIONAL INFORMATION

FOR H.264 (AVC) AND H.265 (HEVC) CODECS MAY BE

OBTAINED FROM MPEG LA, L.L.C. SEE 

HTTP://

WWW.MPEGLA.COM

.

Compliance with Laws

You acknowledge and agree that it is Your responsibility for

complying with any applicable laws and regulations, including, but not

limited to laws and regulations related to call recording, data privacy,

intellectual property, trade secret, fraud, and music performance

rights, in the country or territory where the Avaya product is used.

Preventing Toll Fraud

“Toll Fraud” is the unauthorized use of your telecommunications

system by an unauthorized party (for example, a person who is not a

corporate employee, agent, subcontractor, or is not working on your

company's behalf). Be aware that there can be a risk of Toll Fraud

associated with your system and that, if Toll Fraud occurs, it can

result in substantial additional charges for your telecommunications

services.

Avaya Toll Fraud intervention

If You suspect that You are being victimized by Toll Fraud and You

need technical assistance or support, call Technical Service Center

Toll Fraud Intervention Hotline at +1-800-643-2353 for the United

States and Canada. For additional support telephone numbers, see

the Avaya Support website: 

https://support.avaya.com

 or such

successor site as designated by Avaya.

Security Vulnerabilities

Information about Avaya’s security support policies can be found in

the Security Policies and Support section of 

https://

support.avaya.com/security

.

Suspected Avaya product security vulnerabilities are handled per the

Avaya Product Security Support Flow (

https://

support.avaya.com/css/P8/documents/100161515

).

Downloading Documentation

For the most current versions of Documentation, see the Avaya

Support website: 

https://support.avaya.com

, or such successor site

as designated by Avaya.

Contact Avaya Support

See the Avaya Support website: 

https://support.avaya.com

 for

product or Hosted Service notices and articles, or to report a problem

with your Avaya product or Hosted Service. For a list of support

telephone numbers and contact addresses, go to the Avaya Support

website: 

https://support.avaya.com

 (or such successor site as

designated by Avaya), scroll to the bottom of the page, and select

Contact Avaya Support.

Regulatory Statements

Australia Statements

Handset Magnets Statement: 

Danger:

The handset receiver contains magnetic devices that can

attract small metallic objects. Care should be taken to avoid

personal injury.

Industry Canada (IC) Statements

RSS Standards Statement

Содержание J169












































































































































































































Отзывы: