background image

Name

Description

Auto select any idle appearance

Set 

Auto select any idle appearance

 to N (no) to

optimize answering calls.

Related links

Station administration

 on page 80

Administering features and CAs for all other IP deskphones

You can administer Feature/Call Appearance Buttons 1 to 24 on the Communication Manager

Station form. The features administered on the Station form appear in the same sequence on the

deskphone Feature screen.

Features administered on the Expansion Module JBM24 Call Appearance buttons display on the

phone Features screen following the first 24/12 administered feature buttons.

All administered Button Module Labels, Call Appearances and Feature Buttons, display on the

corresponding module buttons.

In the table phone screen depends on the button type.

Table 5: Station form administration results

Feature / Call
Appearance (CA) /
Bridged Call
Appearance (BA)
buttons on the
Station form...

Displayed as:

1 to 3

N/A

9608/9608G/
9611G and Avaya
J169/J179 phone

N/A

9621G/ 9641G/
9641GS

4 to 11

CAs/BAs on Phone
screen; must scroll to
see more than 3

CAs/BAs on
Phone screen:
must scroll to see
more than 6

Aux buttons 1 to
8 CAs/BAs on
Phone screen;
must scroll to
see more than 3

CAs/BAs on
Phone screen; all
buttons also
appear on the
Quick Touch
panel (if enabled)
and not on the
display screen. If
Quick Touch
panel is disabled,
6 CAs display;
switch to
Features and
scroll to see up to
12 feature buttons

Table continues…

Communication Manager Administration

May 2018

Installing and Administering Avaya J169/J179 IP Phone H.323

81

Comments on this document? [email protected]

Содержание J169












































































































































































































Отзывы: