2. Tap or press
Test
to start phone testing.
Tap or press
Cancel
to return to the Craft Procedures screen without testing the phone.
The test performs the following actions:
• Removes labels on all softkeys .
• Illuminates groups of LEDs at a time on the phone and any attached button modules
sequentially for about a half second. Illumination starts with the upper half of the phone
and continues through the lower half of any attached button module in a repeating cycle.
• Shows pixels on the display with highest intensity.
After approximately 5 seconds, the top phone screen displays either
Self-test passed
or
Self-test failed
.
3. Press or tap
Back
to return to the Craft Procedures screen.
Post installation checklist
To ensure that the phone is properly installed and running properly, verify that the following
requirements are complete.
No.
Task
Reference
1
Has the phone acquired an IP address? N/A
2
Are you able to make a call from the
phone?
For more information, see
device specific using
guide.
3
Are you able to perform backup-
restore?
3
Are you able to modify the phone's
Settings file parameters and end user
settings.
Accessing Craft
procedures during normal
operation
4
Are you able to upgrade your phone?
on page 182
5
For security considerations, have you
configured the phone setup with TLS
signaling? Have you installed the
appropriate private network
authentication certificates?
Initial setup and connectivity
May 2018
Installing and Administering Avaya J169/J179 IP Phone H.323
46
