this character is entered, the telephone examines the contents of the first field to ensure
consistency with the field boundary. That is the absence of hex characters, and at most three
characters of value 255 or less, in the first field if the field boundary is a decimal point. If the first
field contains any content inappropriate for the entered field boundary, an error beep is generated.
You cannot enter more content until the contradiction in the text string is deleted, meaning either
the field boundary is deleted or the cursor is moved back and the field contents edited). After you
enter content that identifies the format of the IP address appropriate to IPv4 or IPv6, the rest of the
address entry conforms to that format.
Local administrative Craft procedures menu
Using the administrative procedures, you can customize the IP deskphone installation for your
specific operating environment. This section provides a description of each local administrative
option covered in this guide, with references to the pages on which the option appears.
Note:
You should press a line key to select a line. Depending upon the privileges assigned to the
user by administrator, an end user can view but cannot change most of the parameters
associated with Craft procedures. For more information, see the applicable user guides.
Administrative
Procedure value
(in English)
Purpose
See
8021X
Set 802.1X operational mode
See
Setting the Operational Mode to 802.1X
on
page 35.
ADDR
Address information programming
Use the pre-installation checklist.
AGC
Enable/disable Automatic Gain
Control
Disabling/enabling automatic gain control
on
page 179.
CLEAR
Clear all values to factory defaults
Clearing the deskphone settings
on page 38.
DEBUG
Enable/disable Debug Mode
GROUP
Set the Group Identifier
on page 181.
HSEQUAL
Handset audio equalization
Setting handset audio equalization
on
page 180
INT
Interface Control
Changing Ethernet interface control
page 40.
LOG
Enable/disable Event Logging
Disabling/enabling event logging
on page 41.
LOGOUT
Log off the deskphone
on page 42.
MLS
View Multi-Language text Strings
Viewing multi-language strings
on page 42.
RESET VALUES
Reset system initialization values to
defaults
RESTART
PHONE
Restart the deskphone
on page 44.
Table continues…
Initial setup and connectivity
May 2018
Installing and Administering Avaya J169/J179 IP Phone H.323
34
