Setting
Options available
Note:
The
Phone Report
option is available only if backup and restore is
enabled.
Port Mirroring
On/Off
Profile
H.323 signaling over TLS to On/Off
Service
Service mode control/Service mode record to On/Off
SSH Status
Enabled/Disabled
Note:
The SSH Status option displays an
Active
status if an SSH connection is
already established.
SSH Fingerprint
2. Scroll to the option that you want to change and press
Change
or touch
OK
to toggle the
selected setting from the available options. The deskphone displays the softkeys
Save
,
Change
, and
Cancel
.
3. If you have made any changes to the Debug Mode option, then you must press or touch
the
Save
option. This action resets the phone and saves the changes to the debug screen.
Note:
When SSH is manually enabled, the SSH port will only be opened for one SSH
connection. When that connection is terminated, the port will be closed, and it must be
reopened (SSH must be re-enabled) from the Craft Debug procedure if another
connection is to be established.
Changing Ethernet interface control
About this task
Use the following procedure to set or change the interface control value.
Procedure
1. When you select INT from the Craft Procedures screen, the phone displays the following
options with a prompt to use the Right and Left navigation arrows to select a setting:
Ethernet
Choice Selector
PC Ethernet
Choice Selector
The options that are displayed are the text strings associated with the current PHY1STAT
on the Ethernet line and the current PHY2STAT system value on the PC Ethernet line.
•
Auto
when PHY1STAT = 1
•
10 Mbps half
when PHY1STAT = 2
Initial setup and connectivity
May 2018
Installing and Administering Avaya J169/J179 IP Phone H.323
40