Avaya J169 Скачать руководство пользователя

Страница: 16 / 203

No.

Name

Description

5V DC Jack

To connect the power supply.

Network port

To connect the Ethernet cable.

PC port

To connect the computer.

Headset Jack

To connect the headset.

Handset Jack

To connect the handset.

WLAN Module Panel

To integrate the Wi-Fi module.

Note:

The Wi-Fi module is not supported in
the Avaya J169 and J179 H.323
phones.

Optional components

You can use the following optional components with phone:

• 5V DC Power adapter
• Button module (JBM24)
• GSPPOE - Avaya 48V PoE power inserter

Power management

Avaya J169/J179 IP Phone receives power from the following sources:

• Avaya DC 5 volt power adapter with barrel jack
• 802.3af PoE (Class 1)
• 802.3af PoE (Class 2) if using JBM24 Module
• GSPPOE - Avaya 48V PoE power inserter

The Avaya DC 5 volt power adapter supports all accessories of Avaya J169/J179 IP Phone. If the

phone is connected to a power adapter and a PoE cable, the power adapter takes precedence

over PoE.

If the power adapter is disconnected, and the PoE cable is still connected, the phone continues to

work on PoE.

If Avaya J169/J179 IP Phone is connected to a PoE cable, and the power adapter is connected,

the phone continues to work without a reboot.

Avaya J169/J179 phone overview

May 2018

Installing and Administering Avaya J169/J179 IP Phone H.323

Comments on this document? [email protected]

Содержание J169












































































































































































































Результаты поиска

Содержание J169

Отзывы:

Похожие инструкции для J169

Бренды по названию

Популярные бренды

Avaya J169, Установка и администрирование

Результаты поиска

Содержание J169

Отзывы:

Похожие инструкции для J169

Бренды по названию

Популярные бренды