manualshive.com logo in svg

Avaya J169, Установка и администрирование

Поделиться
Скачать
Avaya J169 Скачать руководство пользователя страница 130

Parameter name

Default value

Description and value range

Communication Manager, set this value to 81 which is the
port required for HTTPS downloads rather than the using
the default.

TLS_SECURE_RENEG

0

Specifies whether a TLS session should be terminated if
the peer does not support secure renegotiation. Valid
values are:

• 0: TLS secure renegotiation is not required from peer.

• 1: TLS secure renegotiation is required from peer.

TLSSRVR

“ ” (Null)

IP addresses or DNS Names of HTTPS file servers used
to download deskphone files. Dotted decimal or DNS
format, separated by commas. Valid values are 0-255
ASCII characters, including commas.

TLSSRVRVERIFYID

0

Specifies whether the identity of a TLS server is checked
against its certificate. The identity of the server is
checked with the common name or subjectAltName fields
in the server certificate. Valid values are:

• 0: Identity of a TLS server is not checked against its

certificate.

• 1: Identity of a TLS server is checked against its

certificate. The validation of server identity is applicable
for IPSec VPN with certificate based authentication
(using NVSGIP), Backup/restore over HTTPS (using
BRURI), HTTPS file server (using TLSSRVR), WML
browser (using WMLHOME), H.323 over TLS signaling
(using MCIPADD).

 TLS_VERSION

0

Controls the TLS version that is used for all TLS
connections. Valid values are:

• 0: TLS versions 1.0, 1.1, and 1.2 are supported with

TLS v1.2 as default.

• 1: TLS 1.0 and TLS 1.1 are not supported. Only TLS

v1.2 and higher are permitted.

UDT

10

Specifies the Unsuccessful Discovery Timer (UDT) in
minutes. UDT is the time that the phone perform
discovery with list of gatekeepers configured and after
which the phone will reboot if no gatekeeper from the list
is discovered. Valid values are 10 to 960.

VPNALLOWTAGS

0

Specifies whether 802.1Q tags (controlled by L2Q
parameter) can be used in VPN mode. Valid values are:

• 0: Tags not allowed in the VPN mode.

• 1: Tags allowed in the VPN mode.

Table continues…

Administering your phone

May 2018

Installing and Administering Avaya J169/J179 IP Phone H.323

130

Comments on this document? [email protected]

Содержание J169












































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды