Avaya DEFINITY SERIES Скачать руководство пользователя страница 14 | Manualshive

Страница: 14 / 101

Avaya DEFINITY SERIES Скачать руководство пользователя страница 14

DEFINITY Enterprise Communication Server Release 9
Installation and Maintenance for Survivable Remote EPN

555-233-121

Issue 2

November 2000

About This Document

xiv

Resources

DEFINITY ECS Release 9

—

Administrator’s Guide

Provides descriptions of system features. Also provides step-by-step procedures
for preparing the screens that are required to implement the features, functions,
and services of the system. Includes the applications and benefits, feature
interactions, administration requirements, hardware requirements, and
procedures for voice terminal, data module, and trunk group administration.

BCS Products Security Handbook

Provides information about the risks of telecommunications fraud and measures
for addressing those risks and preventing unauthorized use of BCS products. This
document is intended for telecommunications managers, console operators, and
security organizations within companies.

Other Resources

DEFINITY Made Easy Tools

A Web-based tool that provides procedures and information for hardware
installation and initial testing of single-carrier cabinets and multicarrier cabinets
and upgrading to an R9si.

How to Order Books

In addition to this book, other description, installation and test, maintenance, and
administration books are available. A complete list of DEFINITY books can be
found in the

Business Communications System Publications Catalog

.

This book and any other DEFINITY books can be ordered directly from the Lucent
Technologies Business Communications System Publications Fulfillment Center
at 1-317-322-6791 or toll free at 1-800-457-1235.

«
...
12
13
14
15
16
...
»

Содержание DEFINITY SERIES






































































































Отзывы:

Нет отзывов