Avaya Compact Contact Center V5, Руководство системного администратора

Страница: 48 / 67

System Administrator
Page 48 System Administrator
40DHB0002USDU Issue 2b (1st February 2005) Compact Contact Center V5
Backups & Restoring
The Backup Wizard
The backup wizard allows you to specify the type of backup that you want to perform i.e. whether to
overwrite an existing backup or only add the new data. You are also able to verify that the backup has
been successfully completed and control where the data is stored.
To access the backup wizard go to the
File menu and click on the Backup Wizard option. The following
steps explain the information that needs to be completed.
1. At the Welcome screen click on the Next button to continue.
2. Select the database that you want to backup from the drop down list then click on the Next button
to continue.
3. Enter a name and description for the backup and click on the Next button to continue.
4. Select the type of backup you want to make, i.e. do you want to backup the entire database or
only the new or changed data. Click on the Next button to continue.
5. Select where you want the backup to be stored. You can choose to backup to a file or to any
backup device that is available. In this section you can also select whether to overwrite the
backup media or append. If you want to read and verify the integrity of the backup when
completed, select the option on this screen. Click on the
Next button to continue.
6. The Backup Verification and Scheduling screen will appear. You are able to schedule when the
backup should occur. To amend the schedule select the box to the left of Schedule and then click
on the Change button. The Edit Schedule screen will show.
7. Click on the Next button to continue.
8. The final screen shows the backup information that you have defined. If you want to make any
alterations click on the Back button to go back through the wizard. If you do not want to make any
changes click on the Finish button to continue.
9. If your backup requirements were completed correctly, a screen will show stating that the backup
job has been created successfully.