Avaya AP 8120 series, Руководство по установке

Страница: 14 / 176

Mounting options
The access point can be mounted on the following types of surfaces:
• Suspended T-bar ceiling
• Junction box
• Solid surface wall or ceiling
Important:
The solid surface mounting option requires CAT-5 cable that does not have strain relief.
Other mounting options can use CAT-5 cable with or without strain relief.
Status light-emitting diode
The AP 8120 and AP 8120 with External Antenna has four light emitting diodes (LED) that
provide status information on the device. Refer to
Access Point 8120 front view on page 10
for the location of the LEDs. The following table describes the different states of the LEDs.
LED Appearance Meaning
2.4 GHz Blinking green at one
second interval. Radio is operational with no associated
clients.
Blinking green
intermittently fast. Radio is operational with associated clients
that are sending or receiving traffic.
Alternating green and
blue. Radio is set in WIDS mode and RF scanning
both bands.
Unlit Radio is disabled.
5 GHz Blinking blue at one
second interval. Radio is operational with no associated
clients.
Blinking blue
intermittently fast. Radio is operational with associated clients
that are sending or receiving traffic.
Alternating blue and
green. Radio is set in WIDS mode and RF scanning
both bands.
Unlit Radio is disabled.
Ethernet Link
and Activity Solid Blue The access point is connected to a 1Gig PoE
port.
Solid Green The access point is connected to a 100M PoE
port.
Solid Amber The access point is connected to a 10M PoE
port.
Unlit The access point does not have network
connectivity.
AP Power Solid red (POST)
Solid green (Boot) The access point is performing power on self
test (POST).
Indoor installation reference
14 Avaya WLAN 8100 Installation – AP 8120 Series April 2012
Comments? infodev@avaya.com