manualshive.com logo in svg

Avaya 9601, Руководство пользователя, Страница: 83 / 178

Поделиться
Скачать
Avaya 9601 Скачать руководство пользователя страница 83

6-4

OVERVIEW: DEFINITY GENERIC 2 WITH UNIVERSAL MODULES

CROSS-CONNECT FIELDS

The DEFINITY Generic 2 with universal modules uses System 75 port board technology and has 500
pairs per carrier and 3 carriers per module. This creates significant differences in wall-field design from

that used in System 85 and DEFINITY Generic 2 with traditional modules. See chapter 7, MDF/IDF

Design: DEFINITY Generic 2 with Universal Modules,  for more information on wall-field design for

DEFINITY Generic 2 with universal modules.

TERMINALS AND TERMINAL ADJUNCTS

Physical and functional descriptions for prospective customers, account teams, and others who need

specific information on universal terminals and terminal adjuncts for Generic 2 with universal modules
are listed in About This Document under Related Resources.

CONNECTIVITY

Connectivity for DEFINITY Generic 2 with universal modules is similar to that of System 85 and
DEFINITY Generic 2 with traditional modules. A major difference is the use of unshielded M-F B25A
cables to connect the switch to the male-connectorized cross-connect field wherever possible. Previously
installed systems may require M-M A25D connectorized cables. (See figure 1-1,  System 85 and

DEFINITY Generic 2 with Traditional Module Connectivity,  for a typical connectivity configuration.)

MAJOR COMPONENTS—SINGLE CARRIER MODULE

The single carrier module (SCM) introduces new cabinetry and equipment into the G2 environment:

● 

The SCM is designed as a remote module only and cannot support other remote modules.

● 

Each SCM can accommodate one to three single carrier port cabinets to support the port complex.

● 

The module control is duplicated in a single carrier.

Cabinet Types

The main components of the SCM are the single carrier module control cabinet (SCMCC) and the single
carrier port cabinet (SCPC). A full, four-cabinet SCM stack contains one SCMCC and three SCPCs.

Содержание 9601



















































































































































































Отзывы:

Нет отзывов