Avaya 9601, Руководство пользователя, Страница: 25 / 178

2-2
MDF/lDF DESIGN: SYSTEM 85 AND DEFlNITY GENERlC 2 WITH TRADITIONAL MODULES
TABLE 2-1. 300-Pair Terminal Blocks
Product Code
110AB1-300FT*
110AB1-300CT**
110AB1-300CTM†
110AB1-300CB‡
110AB1-3OOCBM§
Comcode
Height (in)
104049051 10.79
104409016
20.37
104409024
20.37
104408083 20.37
104408091 20.37
NOTE: The Meanings for the alphabetic suffixes to the model
codes are as follows:
* Field terminated
** Connectorized w/female connector
† Connectorized w/male
‡ Connectorized bottom w/female connector
§ Connectorized bottom w/male
Table 2-2, 100-Pair Terminal Blocks, gives the ordering information for the 100-pair terminal blocks:
TABLE 2-2. 100-Pair Terminal Blocks
Product Code
Comcode Height (in)
ll0AB1-l00FT*
110AB1-100CT**
ll0AB1-l00CTM†
ll0AB1-l00CB‡
ll0AB1-l00CBM§
103823845
3.59
104408992 13.29
104409008 13.29
104408026 13.29
104408075 13.29
NOTE: The meanings for the alphabetic suffixes to the model
codes are as follows:
* Field Terminated
** Connectorized w/female connector
† Connectorized w/male
‡ Connectorized bottom w/female connector
§ Connectorized bottom w/male
When you are expanding an existing IDF or MDF that was constructed of terminal blocks other than the
ones previously described, maintain uniformity in the field by using the same blocks for the expansion
that were used for the initial installation. For new installations, use the terminal blocks described in this
document.
NOTE: Do not design an installation that uses patchcords with 110A cross-connect blocks.