Panel Overview
Operator's Handbook, AutroSafe Interactive Fire Detection System, Release 4, 116-P-ASAFE-OPERATE/FGB Rev.G, 2016-02-19,
Autronica Fire and Security AS
Page 21
2.8.1.1 Front Push Buttons
Front Push Buttons
Button
Designation
Access
Level
Mute Panel
(black)
Used to mute the panel. Timeout.
(/Mute Int. Buzzer).
(Fire Brigade Loop Panel: The Mute Panel button is
named Silence Buzzer. The Backlight Brightness can
be toggled between high and low by holding the
Silence Buzzer button for 5 seconds until audible
beep (access level 1).
1
Silence Alarms
(red)
Used to silence Fire Alarm Devices (FAD) and cause
lamps to go steady. Timeout.
2
Reset System
(green)
Applies to operator panel and Repeater Panel defined
as a Fire Brigade Panel (switch setting).
Used to reset the system.
In addition, a lamp test can be performed by pressing
and holding the Reset button for at least 5 seconds.
The lamp test is performed in access level 1 (no use
of key).
2
More Events
(black)
Used to scroll downwards among events in currently
active window (scroll page by page). Possible only if
there are more alarms than possible to display in the
window.
2
2.8.1.2 Utility Buttons
Applies to the BS-420 / BS-430.
Utility Buttons
Button
Designation
Menu (black)
Used to toggle between Operation Mode and Menu Mode.
Operation Mode (operate button) >> Menu Mode (operate button or
time-out) >> Operation Mode.
Close Window
(black)
Used to move back one level / show previous picture if the display is
not showing information on the top level.
