System Menu
Operator's Handbook, AutroSafe Interactive Fire Detection System, Release 4, 116-P-ASAFE-OPERATE/FGB Rev.G, 2016-02-19,
Autronica Fire and Security AS
Page 96
13.8 How to Initialize the Fire Alarm System
The AutroSafe Interactive Fire Alarm System is automatically
initialized when the panel is turned on. However, in certain cases it
may be necessary to
manually
initialize the panel.
The procedure below describes how to manually initialize the fire
alarm system.
Step
Actions to be taken
Display Indication
1
To enter the Main Menu, press the Menu button
2
To select SYSTEM, press 4.
3
To select INITIALIZE, press 6.
4
To start the initialization, press
Comments:
The initializing procedure will start, and is
completed when the message «Completed» is
shown in the display. To return the System
Menu, press the Close Window button.
MENU
19:23
Total: 3
1 SHOW STATUS
2 DISABLE
3 ENABLE
4 SYSTEM
5 SERVICE
SYSTEM
INITIALIZE
Start INIT
Phase:
Info:
19:23
SYSTEM
INITIALIZE
INIT
Phase
Initiate
Executing
Info: In progress
Info: Completed
3 PAPER FEED
19:23
