Panel Overview
Operator's Handbook, AutroSafe Interactive Fire Detection System, Release 4, 116-P-ASAFE-OPERATE/FGB Rev.G, 2016-02-19,
Autronica Fire and Security AS
Page 25
2.9 Internal Buzzer
All panels provide a buzzer which is activated differently depending on
the panel in question. See the following chapters for information on
the buzzer behaviour for the different panels.
Generally, each condition may have its own
sound pattern
. If more
than one condition is present simultaneously, the buzzer will reflect
the condition which has the highest priority.
The buzzer can be silenced by pressing the
Mute Panel
button.
If the reason for the buzzer signal still exists, the buzzer will resound
after a predefined time.
2.9.1 Operator Panel BS-420/BS-430
The internal buzzer on the BS-420/BS-430 is activated in the cases of:
System Fault
Faults
Alarm
Prealarm
Early Warning
2.9.2 Repeater Panel BU-BV-420
The internal buzzer on the BU-BV-420 panel (configured by means of
dip-switches as either an Information Panel or a Fire Brigade Panel) is
activated in the cases of:
System Fault
Alarm
2.9.3 Fire Brigade Loop Panel BU-110
The internal buzzer on the BU-100 panel is activated in the cases of:
Alarm
Internal System Fault
Communication Fault
2.9.4 Information Loop Panel BV-110
The internal buzzer on the BU-100 panel is activated in the cases of:
Alarm
Fault
Internal System Fault
Communication Fault
