Appendix
Operator's Handbook, AutroSafe Interactive Fire Detection System, Release 4, 116-P-ASAFE-OPERATE/FGB Rev.G, 2016-02-19,
Autronica Fire and Security AS
Page 154
15.2.5 Configuration Example
An example of a typical configuration would be as follows:
Each single room with one or several detectors is defined as a
Detection Zone
, DZ1, DZ2, etc.
Each corridor and stairway is defined as a
Detection Zone
.
Two main sections on each floor, divided by a fire wall, are each
defined as an
Alarm Zone
, AZ1 and AZ2. These alarm zones are
also defined as
neighbour
alarm zones.
The
entire
building, controlled and monitored by a Fire Alarm
Control Panel (operator panel), is defined as an
Operation Zone,
OZ.
