4444----1111----3 Print adjustment mode
3 Print adjustment mode
3 Print adjustment mode
3 Print adjustment mode
Setting of print density and print position are done in this mode.
A) Press PAUSE to show ‘Pause’ on LCD.
B) Press DENSITY / POSITION to show ‘Print Density / +-00’.
C) Press DENSITY / POSITION again to proceed.
D) Press
to change the values and press ENTER to fix.
E) Press PAUSE to exit from Print adjustment mode.
1) Print density ‘ Print Density /
’
Function : Change print density.
Range : - 15 to + 15
The density increase as the value increases.
2) Print position ‘Print Position /
’
Function : Adjusting print starting position by 0.1 mm.
Range : - 30 to + 30
The print out goes back against feeding direction as increasing the value.
Feed
3mm
2mm
1mm
Label
